Loading...
Serving Daly City, CA and surrounding areas. (415) 259-5082
Vehicles moving too fast through your driveway or parking area are a safety risk you can fix today. We install permanent hot-mix asphalt speed bumps that hold up through Daly City's wet seasons without shifting or crumbling.
Vehicles moving too fast through your driveway or parking area are a safety risk you can fix today. We install permanent hot-mix asphalt speed bumps that hold up through Daly City's wet seasons without shifting or crumbling.
Speed bump installation in Daly City means a crew arrives with hot-mix asphalt, prepares your existing surface, and hand-forms a compacted bump bonded directly to the pavement. Most single-bump residential jobs are completed in a few hours, and the area is ready for vehicles the same day once the asphalt cools.
Unlike rubber mats or plastic inserts that shift, fade, and need replacing, a properly installed asphalt speed bump is a permanent part of your surface. It works every time, for every driver, without reminders. If you are also addressing surface water issues, pairing this work with asphalt sealcoating protects both the bump and the surrounding pavement from Daly City's persistent moisture.
If cars regularly roll through your private driveway, shared lane, or parking lot faster than feels safe, a speed bump is the most reliable way to change that. Paint, signs, and verbal reminders tend to lose their effect over time - a physical bump does not.
Many Daly City homes have driveways that double as play areas or walkways for pets. If kids or animals are frequently near vehicle traffic, slowing that traffic with a bump is a straightforward safety upgrade that works for every driver who pulls in.
Shared driveways and parking areas in Daly City's dense neighborhoods see residents, guests, and delivery drivers who are unfamiliar with the space. A speed bump sets a clear physical expectation for everyone who enters - not just people who already know the property.
If you are already planning asphalt work - resurfacing a driveway or patching a parking area - adding a speed bump at the same time is the most cost-effective moment to do it. The crew and materials are already on site, and the new bump bonds cleanly to fresh asphalt.
Every speed bump job starts with a site visit because the right dimensions depend on your specific surface and the vehicles that use it. A taller, narrower profile slows traffic more aggressively and suits areas where only standard passenger vehicles pass. A lower, wider taper works better for lots shared with delivery vans, rideshares, or emergency vehicles. Getting the dimensions right matters for safety and for the long-term comfort of everyone using the surface. We also offer parking lot striping to add visibility markings across the bump at the same time, so drivers see it clearly - especially useful in Daly City's frequent evening fog.
For properties that need multiple bumps - multi-unit parking lots, longer shared driveways, or HOA-managed lanes - we plan spacing so the bumps work together as a system rather than just individual obstacles. All work is hot-mix asphalt bonded directly to the existing pavement and compacted with hand tools for smooth, tapered edges. Before we leave, we walk the finished bumps with you to confirm transitions are clean and there are no gaps at the edges.
The right choice for a standard private driveway. Completed in a few hours, same-day access resumed.
For longer driveways or HOA-managed lanes where one bump is not enough to slow traffic through the full length.
Suited for commercial or multi-unit lots where the lane spans two or more vehicle widths.
Adds yellow or white visibility stripes across the bump after curing - important for evening visibility in foggy Daly City.
Most cost-effective when combined with driveway resurfacing or repair already on the schedule.
Daly City is one of the most densely populated cities in California, with tightly packed homes, narrow driveways, and steep grades in many neighborhoods. That density means a large share of driveways are shared between attached homes or managed by homeowners associations - situations where driver behavior in the lane directly affects multiple households. A speed bump is a one-time install that changes driver behavior for every person who uses the space, without requiring any ongoing management. Daly City also has virtually no freeze-thaw cycle, so asphalt speed bumps face none of the frost-heave cracking common in colder climates - the main maintenance concern here is edge drainage, which we address in how we taper and finish each bump.
We work across the surrounding area as well, including properties in Colma, CA and South San Francisco, CA, where similar HOA-governed and multi-unit housing conditions apply. If your property falls under HOA rules, we ask about that at the estimate stage so you know exactly what approvals to gather before we schedule the work - no surprises on the day of installation.
California requires contractors performing paving work to hold a current state contractor's license. You can verify any contractor's license status through the Contractors State License Board at no cost before you hire.
We reply within one business day. Describe the surface - driveway, shared lane, parking lot - and roughly how many bumps you need. We will schedule a site visit before giving you a firm price, because slope, access, and surface condition all affect the job.
We walk your surface, measure the width, check the slope, and confirm equipment access. We discuss bump height and profile with you here - choosing dimensions that slow traffic without damaging low-clearance vehicles. If an HOA approval is needed, bring that documentation to this meeting.
For most private driveways, no permit is needed. If your surface touches a shared or public-adjacent area, we confirm the permit situation for your address before scheduling. Once everything is clear, we set an installation date that works for your household.
The crew preps the surface, applies bonding material, and hand-forms the bump in hot-mix asphalt. Most single-bump jobs take only a few hours. After the asphalt cools - typically a few hours - you can drive over it. We walk the finished work with you before leaving.
Free on-site estimate. Most single-bump jobs done in one visit. We reply within one business day.
(415) 259-5082Narrow driveways, steep grades, and attached-home layouts are common across Daly City. We walk every site before quoting because factors like slope and equipment access directly affect how the job is done - not just what it costs.
A bump built to the wrong height or profile can scrape low-clearance vehicles and damage them. We ask about every vehicle type that uses your surface - passenger cars, delivery vans, rideshares - and recommend dimensions that slow traffic without causing damage.
California requires paving contractors to hold a current state license before performing this work. You can verify our license status in seconds through the CSLB online lookup - an active license confirms the contractor is bonded and in good standing.
Membership in the National Asphalt Pavement Association means we follow established standards for asphalt bonding, compaction, and edge finishing - the details that determine whether a bump lasts years or starts crumbling within a season.
Speed bump installation is a small job that makes a permanent difference. We treat it with the same care as a full driveway project - because the bonding, profiling, and edge work done on install day determines how long the bump holds.
Protect your driveway and newly installed speed bumps from Daly City's persistent coastal moisture with a fresh sealcoat layer.
Learn MoreAdd visibility stripes across speed bumps and repaint lot markings so every driver can navigate your parking area safely.
Learn MoreOur crew can typically complete a single-bump job in one visit - call now to get on the schedule while spots are open.