
Daly City Asphalt Paving is the asphalt paving contractor Millbrae homeowners call for asphalt resurfacing, driveway paving, sealcoating, and pothole repair. We have served Millbrae and the surrounding Peninsula since 2015, and we understand the mid-century housing stock, bay-side marine air, and clay soils that make asphalt work here different from a newer inland suburb. Honest estimates, no pressure, and a response within one business day.

A large share of Millbrae driveways are original to mid-century construction and have surface cracking and oxidation that makes them look and feel older than they need to be. When the base is still sound, asphalt resurfacing adds a fresh layer over the existing base and gives the driveway another decade or more of life at a fraction of full replacement cost.
When a Millbrae driveway has failed beyond what resurfacing can fix - cracked through, sunken, or with a compromised base - we handle full-depth replacement. We account for Millbrae's clay soils in the base preparation so the new driveway does not go through the same cycle of cracking within a few seasons of being installed.
Millbrae sits close to San Francisco Bay, and marine fog keeps exterior surfaces damp for long stretches even in the dry season. Unsealed asphalt absorbs that moisture steadily, softening the binder over time. Sealcoating every three to five years blocks this process and keeps the surface from becoming brittle and prone to cracking ahead of schedule.
Potholes in Millbrae form when surface cracks allow winter rain to reach the base, and repeated vehicle loads collapse the weakened spot. We do not cold-fill and leave - we cut out the failed section, rebuild the base layer, and pack it properly so the repair blends with the surrounding surface and does not become a water collection point.
Millbrae's dry summers cause asphalt to contract and open cracks that are not visible in the wet season. Left unsealed, these gaps become water entry points once winter rain returns, and the base breaks down from below. Sealing cracks before November is the lowest-cost step a Millbrae homeowner can take to protect a driveway that still has good structural life.
Hillside properties on the western side of Millbrae channel significant runoff onto driveways each winter, and low points where water pools cause base damage faster than any other single factor. We assess grade and install channel drains or redirect surface flow so water moves away from the paved area rather than sitting on it and soaking in.
About 70 percent of Millbrae's homes are single-family residential, and most of that housing stock was built in the 1940s through 1970s. After 50 to 80 years, the original driveways, flatwork, and curbs on those properties are reaching or past the end of their natural service life. What makes Millbrae different from inland Bay Area suburbs is the combination of clay soils at lower elevations and persistent marine moisture from the bay. Clay soils here swell during the wet season and contract each summer, and that ground movement stresses asphalt from below in a cycle that repeats every year. An asphalt job that does not account for how the soil moves will crack prematurely and return to the same condition within a few seasons.
Millbrae also has a hillside zone on the western side of the city where sloped driveways and retaining walls require different planning than flat-lot work. These properties need drainage integrated into the driveway design - not as an afterthought - because concentrated runoff from winter storms is one of the main reasons hillside driveways fail before flat ones. The proximity to San Francisco Bay adds salt-laden fog that breaks down unsealed asphalt binder faster than in drier, inland locations. A contractor who understands all of these factors together produces work that lasts. One who does not will leave you with a driveway that looks the same after a few wet seasons as it did before.
Our crew works throughout Millbrae regularly, and we understand the local conditions that affect asphalt paving work here. The city divides clearly between the flat eastern side - where neighborhoods near the Millbrae BART and Caltrain station have standard grid streets and level driveways - and the hillside streets to the west, which have steeper grades and more variable lot shapes. We bring the right equipment for both types of property and know which roads give the best crew access to each side of the city.
El Camino Real runs through Millbrae as its main commercial corridor and gives us fast north-south access across the city. US-101 along the bay side and I-280 along the hills mean we can reach any Millbrae property quickly from our base in Daly City. We also serve neighboring Burlingame, CA to the south and San Bruno, CA to the north, so if your address sits near either city line, we are already familiar with your neighborhood and its conditions.
Call or submit your project details online. We reply within one business day. You do not need exact measurements - a general sense of the driveway size and what you are seeing helps us prepare for the site visit.
We visit your Millbrae property, check the base condition, grade, drainage, and surface damage, and give you a written estimate before any work is scheduled. We will be direct about whether resurfacing, patching, or full replacement is the right call for your driveway - and what each option costs.
We handle prep, any necessary removal, and the paving on the scheduled day. Most residential driveway jobs in Millbrae are completed in a single day. You do not need to stay home, but someone should be reachable to confirm site access.
We clean up, walk you through the finished surface, and explain the cure time before we leave. New asphalt is walkable the same day and ready for vehicle traffic within 24 to 48 hours.
We serve all of Millbrae - from the flat neighborhoods near El Camino Real to the hillside streets on the western side of town. Call or send your project details and we will respond within one business day.
(415) 259-5082Millbrae is a small residential city in San Mateo County covering roughly 3 square miles, with a population of around 20,000 to 25,000 residents. The city borders San Francisco International Airport to the north, making it one of the more transit-connected communities on the Peninsula. The City of Millbrae has been essentially built out for decades, which means the housing stock is established and most of the roughly 8,000 dwelling units are owner-occupied single-family homes built between the 1940s and 1970s. El Camino Real serves as the city's main commercial street, anchored by local shops, restaurants, and the Millbrae BART and Caltrain station that make it one of the Peninsula's most connected transit hubs.
The eastern half of Millbrae is flat bay-plain land that carries grid-plan residential streets, while the western half rises toward the Santa Cruz Mountains foothills with more varied terrain and steeper lots. Homeowners in Millbrae tend to be long-term residents with real equity in their properties - Bay Area home values make maintenance a worthwhile investment, and neglecting a driveway or retaining wall often leads to more expensive repairs down the road. Nearby Burlingame, CA to the south and San Bruno, CA to the north share the same soil conditions and housing age, and we provide the same range of asphalt services across all three cities.
Protect your pavement and extend its life with professional sealcoating.
Learn MoreCrisp, durable line markings that keep your lot organized and compliant.
Learn MoreSeal cracks early before water damage turns small problems into big repairs.
Learn MoreLarge-scale paving solutions designed for commercial properties and businesses.
Learn MoreOngoing maintenance programs that keep your parking lot in top condition.
Learn MoreRestore worn pavement with a fresh asphalt layer at a fraction of replacement cost.
Learn MoreProper site preparation and grading for a stable, long-lasting paving base.
Learn MoreDurable concrete curbs and sidewalks that define and protect your property.
Learn MorePrecision milling removes old asphalt and prepares surfaces for resurfacing.
Learn MoreEffective drainage systems that prevent water pooling and pavement damage.
Learn MoreCustom speed bump installation that improves safety in parking areas.
Learn MoreFrom resurfacing an aging flat-lot driveway to rebuilding a hillside surface with proper drainage, we handle it all in Millbrae. Get in touch and we will respond within one business day.